Easy
Less than 15 minutes
This authentic replacement part is supplied directly from the original equipment manufacturer for use on Murray and Snapper walk-behind lawn mowers. The cable stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. Keep in mind this high-quality rubber insulated component is sold individually. Refer to the owner's manual and the appropriate diagrams for your model to ensure the correct repair procedure.
Cable, Bail, 22 Wbm 7101395YP
OEM part for: Murray, Snapper
Part Number: 7101395YP
$17.30
In Stock
Ships within 1 business day 
Compatibility
This Cable, Bail, 22 Wbm will fit the following 52 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Mower Parts
This part replaces obsolete part #: 7101395
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
6
4 stars
0
3 stars
0
2 stars
0
1 stars
1
< PREV
- 1
Works as intended
Fast shipping, accurate parts diagram, perfect fit. I will definitely use this site again
Guest -
May 23, 2023
Verified Purchase
Exact part and came early than expected.
It fits well and works great. I will be sending others.
Guest -
November 26, 2022
Verified Purchase
Easy repair
Arrived quickly,,part fit, lawnmower works.
Linda -
October 15, 2020
Verified Purchase
part order
This was my first order from your company. Everything went as planned, the part arrived on time and fir perfectly. Very happy with the process.
Guest -
May 20, 2020
Verified Purchase
Easy replacement
The new throttle cable installed eazy but it was not 100% of the problem (or the problem at all). Turns out the carburetor just needed to be cleaned out and the part bought was a waste of money. But on the bright side I don't have to worry about that being an issue in the near future.
Guest -
August 6, 2019
Verified Purchase
Easy Fix
Cable was just a touch too long, However I made a Knot on the wire and it works just fine.
Guest -
July 12, 2019
Verified Purchase
Wrong part sent. When am I getting my refund?
wrong part. it was two inches too long. No help from Murray or Briggs and Stratton either. pretty worthless system.
Guest -
July 11, 2019
Verified Purchase
eReplacementParts Team
Hello Craig, Thank you for leaving a review on the part ordered. Checking the order I am showing you have already contacted us to address the issue and the refund was applied on 07/02/19. Please let us know if there is anything else we can assist you with.
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Cable, Bail, 22 Wbm
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Old cable rusted and broke. Lever would not work to start mower
Robert - May 5, 2016
👍 9 of 12 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Parts Used
Replaced cable assembly. Worked properly had to pry open metal holder to put new cable in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cable wire for automatic release bar that kills the engine broke after 7 years.
kevin - December 16, 2017
👍 3 of 4 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers
Parts Used
Removed it with needle nose pliers and popped the new one on.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Blade control cable kinked
Raleigh - November 18, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
Removed and replaced blade control cable with OME cable from e replacement. Adjust kill switch
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cable was broken, Needed to be replaced
Andrew - July 10, 2018
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed, Just 2 cable ties
Parts Used
The part received was identical to the broken part. I just snapped off the broken one and snapped on the new one and cable tied the new cable to the handle. Very simple repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cable Bail broke
bill - April 22, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, hammer
Parts Used
Removed old cable bail and use screw driver and rubber hammer to lock cable bail to handle.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Could Not Start/Stop mower due to broke control cable
Tim - June 28, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Needle nose pliers
Parts Used
1. Remove cable ties holding cable onto handle
2..Cut old cable for easier removal
3. Remove z-bend cable end from handle end
4. Use screwdriver to pry off cable clamp
5. Unsnap cable retainer on throttle assembly with pliers
6. Remove z-bend cable end from throttle assembly
7. Re-install new cable in reverse order - easy!
2..Cut old cable for easier removal
3. Remove z-bend cable end from handle end
4. Use screwdriver to pry off cable clamp
5. Unsnap cable retainer on throttle assembly with pliers
6. Remove z-bend cable end from throttle assembly
7. Re-install new cable in reverse order - easy!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Stretched cable
Jose - May 30, 2016
👍 1 of 2 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Pliers
Parts Used
I just started at the top of the mower and took the old cable of and put the new cable on the handle, then removed it from the handle, and put the new one on the handle. Then took the bottom of the cable out of the bracket and installed the new in the same place.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Cable broke
Ron - April 29, 2017
👍 0 of 1 people found this instruction helpful
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
1. Remove old sleeve from mower
2. Put new cable and sleeve on mower handle.
3. Attached both ends of cables to mower.
2. Put new cable and sleeve on mower handle.
3. Attached both ends of cables to mower.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
