Easy
30-60 minutes
This is a genuine OEM part. The blower wheel with clip is composed of durable plastic and includes a metal clamp. This Whirlpool component is compatible with many dryer appliances. The blower wheel is secured to the drive motor shaft, allowing air to disperse from the drum. A screwdriver may be necessary for making the replacement. Please refer to the specific manual for additional repair instructions. The blower wheel with clip is sold individually.
Dryer Blower Wheel Y303836
OEM part for: Whirlpool, Maytag
Part Number: Y303836
$22.86
In Stock
Order within the next 12 hours and your part ships today! 
Jump To:
Frequently Purchased Together ?
Compatibility
This Dryer Blower Wheel will fit the following 1239 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 1239 matching models.
1239 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- International
- Jenn-Air
- Maytag
- Whirlpool
This item works with the following types of products:
- Dryer
Repair Videos ?
Watch the Repair Video for
Dryer Blower Wheel
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Right part and quick delivery.
Part went right together.
Guest -
August 13, 2022
Verified Purchase
Easy repair
The part was perfect, but shipping was slow. I’m was pleased with the part.
Guest -
August 25, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Dryer Blower Wheel
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
center of blower wheel rounded out
Tom - March 31, 2024
Tool Type
Dryer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Nutdriver
Parts Used
remove 2 screws at bottom of dryer. pull front of dryer off and place along left side. unplugging door switch not necessary. remove two bolts inside drum to remove blower wheel cover. remove clamp holding blower wheel. remove old blower wheel and install new one lining up the flat on the motor "D" shaft. installation is reverse of removal
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dryer was noisy, but dried fine.
Gregg - February 23, 2018
Tool Type
Dryer
Difficulty
Medium
Time
1-2 hours
Tools Used
Screwdriver, Pliers, Power Drill, Socket set, Adjustable Wrench
I initially ordered a new belt, and new drum rollers. As I began disassembly, I realized that the fan cage "d-shape" had worn into a circle! This was actually the main problem, but I decided, since I WAS IN THERE, TO REPLACE THE AFOREMENTIONED PARTS, BUT ALSO THE IDLER PULLEY.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Dryer making noise while running, particularly on start up
arthur - August 3, 2017
Tool Type
Dryer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set, Snap ring pliers (expanding type)
Parts Used
Removed front panel, (two screws at bottom) removed 4 screws holding front tumbler support. Removed small shield, to gain access to front panel of blower housing. Removed same blower front housing cover, by removing several small screws.
Removed two clamps holding blower to it's shaft. One with pliers & one with snap ring pliers.
Slid blower off of shaft & replaced with new one. Re-installed all parts. Note: Make sure you re-check the belt position on tumbler, prior to re-installing front support. I didn't & it made a whistling noise, due to misalignment! had to go back in & re-align the belt.
Removed two clamps holding blower to it's shaft. One with pliers & one with snap ring pliers.
Slid blower off of shaft & replaced with new one. Re-installed all parts. Note: Make sure you re-check the belt position on tumbler, prior to re-installing front support. I didn't & it made a whistling noise, due to misalignment! had to go back in & re-align the belt.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
