This is a genuine Black and Decker replacement part, it is sold individually.
It is made of plastic.
The purpose of the 241381-01 Blade Insulator is to keep the 092715-00 spacer from coming in contact with the blade and to eliminate vibration.
Blade Insulator 241381-01
OEM part for: DeWALT, Black and Decker
Part Number: 241381-01
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Blade Insulator will fit the following 103 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Black and Decker
Show More Compatible ModelsThis item works with the following types of products:
- Lawn Mower Parts
Repair Videos ?
Step-by-step instructions for removing and installing the blade insulator on your Black and Decker electric mower....
October 13, 2017
|
Customer Part Reviews ?
- 1
- 2
- 3
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Blade Insulator
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Blades would slip when mower started, took long time to build up RPM
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
The blade and fan needed to be replaced.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Starting closest to the mower, I replaced the Spacer, no problem there. Next was the Fan, once again, no problem. Followed by the Blade, and it tells you what side should face the ground written right on it. Now, this is the point where you need to pay attention. What is next is called an Insulator followed by another spacer. The insulator has ridges on each side of it, that will straddle the blade on one side, and the metal spacer on the other side. Each have a oval hole in the center and you need to make sure each is pushed far enough on to the shaft to fit snugly on the oval part of the shaft. The tricky part for me was to keep everything lined up and inside of the ridges, plus keeping everything pushed up on the shaft to expose the threads for the Hex Nut to get started. Once the Hex Nut is started, the only thing you need to do at that point is to make sure everything stays lined up as you tighten the Hex Nut. As you tighten Hex Nut, and the blade and insulator and the metal spacer become not aligned, loosen the Hex Nut enough to get everything back in line and start tightening again. Hope this helps.
Plastic parts on either side of metal blade stripped, thus no longer holding blade in place.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
2. Pulled worn plastic Fan off.
3. Pushed new replacement Fan onto the spindle.
4. Placed blade onto Fan's nipple.
5. Placed Plastic Blade Insulator against Blade,
6. Placed metal spacer.
7. Screwed on the nut and tightened.
The blade would not tighten properly.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Replaced the damaged fan and blade insulator
Tool Type
Lawn Mower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Wrench Set
Parts Used
Blade insulator lost
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Fan and blade insulator broke and the spacer was rough and rusted
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
2. Put back the new fan, old blade, new blade insulator and new spacer
3. Tightly screwed on the hex nut with a socket wrench
Lawn mower fan broke
Tool Type
Lawn Mower
Difficulty
Medium
Time
Less than 15 minutes
Tools Used
Pliers
Pried off broken fan
Replaced fan with new fan
Slid on blade spacer
Slid on blade
Slid on blade insulator
Attached blade.
Blade was not spinning in time with the electric motor
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, 19mm/ 3/4inch socket and ratchet
1. Removed nut securing the blade with a 19mm socket.
2. Removed blade insulator.
3. Removed the fan, found the fan had cracked and the center hub was no longer part of the fan blade assembly. This is a common problem with the B&D mower. the fan assembly strikes nuts protruding form the bottom of the mower.
Ordered parts using the exploded diagram on e replacements web-page. the blade was dull so I ordered one too.
Reinstalled parts in reverse order. Fan blade assembly, mulching blade, blade insulator, and metal washer. Tightened securing nut. Rotated blade to insure there was no interference. plugged mower in and tested on a small area of my lawn. Worked perfectly.
Fan blades broken, plastic spacer worn out.
Tool Type
Lawn Mower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench, Large slip joint pliers.
2. Removed spacer, insulator, fan.
3. Replaced parts in reverse order.
4. I looked at the exploded diagram on the parts ordering page to be sure I put the parts back in correct order. Print screen that when you order your parts. Make sure you are looking at the correct model and version number.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.