Easy
15-30 minutes
The bail spring goes next to the bail spring guide A support. This item is made out of metal and is sold individually. This authentic item is supplied directly from the original equipment manufacturer for use with Shimano reels. During replacement, it may require a screwdriver to help install this part correctly. Over time this part may bend or break and will need to be replaced.
Bail Spring 10FVD
OEM part for: Shimano
Part Number: 10FVD
$5.19
Factory Backorder
Date Available: Unknown 
Jump To:
Frequently Purchased Together ?
Compatibility
This Bail Spring will fit the following 135 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Shimano
Show More Compatible ModelsThis item works with the following types of products:
- Reel Parts
This part replaces obsolete part #: RD7921, RD10753, RD7789
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Back to “Just Like New”
The folks at Ereplacement get you the exact, correct parts to keep your gear in tiptop fighting shape. Thanks for making this process easy!
Guest -
July 11, 2021
Verified Purchase
Place to go for parts!
The springs for (5) “hard to get parts for” reels arrived quickly. The products were great and repairs were performed.
Guest -
August 17, 2020
Verified Purchase
Worked perfect.
Had a great Shimano reel that I was going to throw away. Checked with replacement and found the three causes of bail flip failure. Installed three parts and reel works like brand new. Replacement is awesome. This is the 3rd time I have gone to your site, found possible problem, ordered parts and repaired successfully.
Brad -
November 11, 2019
Verified Purchase
Easy repair
Not able to use this reel for four years. Stumbled upon your website and was finally able to get the parts. Worked perfect. Shipping was a dream, very smooth transaction.
Vicky -
September 24, 2019
Verified Purchase
exact part i needed
easy replacement of bail spring that had weakened over 20+ years of use. The bail would close during cast. New Bail spring stopped that. Surprised me that I could find a new one but ereplacement had it.
Guest -
August 3, 2019
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Bail Spring
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
bail arm was worn. Holes were wallowed out
THOMAS - April 25, 2024
👍 1 of 1 people found this instruction helpful
Tool Type
Reel
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver
Removed bail, bail arm, bail spring and spring guide. Used grease to hold spring guide and bail trip rod in place. reinstalled new bail arm assembly and then the bail spring. Reinstalled bail.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Weak bail spring
Lynn - July 21, 2020
👍 1 of 1 people found this instruction helpful
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Took line bail off and installed the spring lubed reel parr’s and put back together
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Frozen roller
Dexter - August 4, 2022
Tool Type
Reel
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Dremel
Used dremel to cut deeper and wider slot to remove screw. Broke off the screw head and slipped the roller out.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Side cover broke
steve - March 18, 2020
Tool Type
Reel
Difficulty
Medium
Time
15-30 minutes
Tools Used
, Phillip\\\'s screwdriver
Parts Used
Replace side cover
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bail would not close
Steve - January 18, 2020
Tool Type
Reel
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Replaced bail spring and lever
Did you find this story helpful?
Thanks for voting and helping fellow customers!
bail would not close
steve - June 25, 2019
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Parts Used
replaced bail spring. works like new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bail wouldn't trip
Joseph - August 3, 2018
Tool Type
Reel
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver
Removed bail
Removed bail arm
Replaced bail arm,spring,guide
Better than new
Removed bail arm
Replaced bail arm,spring,guide
Better than new
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bail trigger worn down and rough operation
Kenneth - March 8, 2017
👍 1 of 2 people found this instruction helpful
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Removed the screws holding the bail arm on, watch for a small washer on the trigger side. Removed bail and cross bar the bail attached to. Removed the whole spinning housing by sliding off the central post. Cleaned and greased operating parts. Keep in mind there are two very small detent springs. One is placed in the white spacer which has a designated placement between two body posts. The other spring is tensioned by a separate body post. Replace spinning housing, removed side cover on trigger side to access auto bail close arm and spring. Pull this out and replace new parts the same configuration as was found. The small pinched side of the spring is the side the black auto bail trip bar goes in. Put back on side plate with two screws. Replace quick fire parts by two screws. Bail goes back on with one machined metal thread screw and one plastic thread screw. Grease all your parts after cleaning, including the mating faces of the new quick fire trigger parts, allows for easy break in.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Nothing at all. The part I needed was no longer available and I got one that looked similar.
Chris - June 16, 2023
👍 0 of 1 people found this instruction helpful
Tool Type
Reel
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Sand paper
The part wasn’t for my reel specifically. The part for mine was no longer available. Found one that looked similar and with a little sanding, my 30 something year old favorite reel was as good as new.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Bail would not close
steve - March 18, 2023
👍 0 of 1 people found this instruction helpful
Tool Type
Reel
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver
Parts Used
Dissamble bail assembly. Replace bail and washer. Reassemble bail assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
