Easy
30-60 minutes
This is a genuine replacement part manufactured for use with outdoor power equipment. The fuel vent is used to allow air into the tank while not allowing air or fuel out. As fuel in the tank is drained to the carburetor air needs to take its place otherwise a vacuum would occur inside the tank prohibiting fuel from draining to the carburetor. The vent assembly is just pressed into the slot on the tank, but a screwdriver may be needed to remove the housing. This vent assembly is sold individually.
Vent Assy. 13130056431
OEM part for: Echo, Little Wonder
Part Number: 13130056431
$7.19
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Vent Assy. will fit the following 194 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Trimmer Parts
- Chain Saw Parts
- Saw Parts
- Hedge Trimmer Parts
This part replaces obsolete part #: 13130056430, 13130040630, 131300-56430
Repair Videos ?
Articles:
|
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
2
4 stars
0
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Did the job
The parts came, fixed the problem, it works
Guest -
September 5, 2023
Verified Purchase
Excellent service always
I order from you fairly frequently, and am always completely satisfied with the service I receive. Customer service people are some of the best I have ever encountered: knowledgeable, friendly, patient, and accommodating. Items delivered are exactly those ordered, and in a rare case or two when there was a problem, it was quickly and cheerfully corrected.
Guest -
November 30, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Vent Assy.
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power cords
Keith - March 15, 2021
Tool Type
Saw
Difficulty
Easy
Time
1-2 hours
Tools Used
Screwdriver, Wire Strippers
Parts Used
Open switch compartment cover. Cut or unscrew wires. Connect new cord. Vacuum and replace cover. Plug in and test.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Idled ok but no power.
Arden - April 27, 2018
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
, Fingers and thumbs
Parts Used
- Fuel Grommet - 13211546730
- Fuel Filter - A369000480
- Clip - 13201309820
- Vent Tube - V471001201
- Fuel Tank Vent - A356000031
- Purge Bulb - P005003120
- Fuel Line - V471001211
- Tube Connector - 13201103360
- Pipe - 13201212362
- Fuel Return Tube - 13201056330
- Vent Cover - 13132840630
- Fuel Line - V471001191
- Vent Assy. - 13130056431
Removed and replaced all tubes, grommets, filters, etc., and primer bulb. Grommet was leaking for sure, bulb seems to also have had a small leak.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Gas was pouring out of the grommet.
Johnny - September 19, 2017
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Wrench Set, Nutdriver
Pull all fuel hoses off and the grommet. Replace with the new and reassemble.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Fuel delivery issue
Stephen - September 6, 2017
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Pliers
Remove old parts and replaced with new parts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
All the lines for the fuel where dry and cracked.
Delores - July 7, 2016
Tool Type
Hedge Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
, Just a Socket for the Spark Plug and an Alen wrench
1. Took all the lines out of the gas tank
2. Placed all the lines beside all my new parts and used it as my guide
3. Once I got all the pieces together I pushed the grommet back into the tank (not an easy thing to do)
4. I then took the old primer out and installed the new one, making sure I didn't get any dirt in the small hole for the gas to feed the primer
5. I replaced the old air filter with the new one and again you have to make sure you don't get any dirt in the area.
6. I took the new spark plug and compared the gap to the old one making sure it was the same
7. I then turned the trimmer over and replaced the screw that had been lost
8. I then greased everything and started my trimmer
2. Placed all the lines beside all my new parts and used it as my guide
3. Once I got all the pieces together I pushed the grommet back into the tank (not an easy thing to do)
4. I then took the old primer out and installed the new one, making sure I didn't get any dirt in the small hole for the gas to feed the primer
5. I replaced the old air filter with the new one and again you have to make sure you don't get any dirt in the area.
6. I took the new spark plug and compared the gap to the old one making sure it was the same
7. I then turned the trimmer over and replaced the screw that had been lost
8. I then greased everything and started my trimmer
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
