Easy
15-30 minutes
This replacement chute assembly is an authentic OEM sourced item that is specially designed for Murray snow throwers. It is used to direct the snow that is being picked up by the unit away from the unit. This part is made from durable plastic and it is sold individually. Replacing this part is a simple task that should only require a wrench set.
Assembly Chute C1 653blk 762222MA
OEM part for: Murray
Part Number: 762222MA
$60.92
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Assembly Chute C1 653blk will fit the following 324 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Displaying 20 of 324 matching models.
Murray
Show More Compatible Models324 total model matches. Try the above search to narrow your results.
This is the official OEM part for the following brands:
- Craftsman
- Murray
- Simplicity
- Snapper
This item works with the following types of products:
- Snowblower
This part replaces obsolete part #: 325847MA, 334234MA, 325847, 302574, 585414, 307693, 307698, 723657, 334234
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
19
4 stars
3
3 stars
2
2 stars
2
1 stars
0
< PREV
- 1
- 2
- 3
Easy repair
Just what I needed!!
iGlobal -
October 3, 2023
Verified Purchase
Fast and easy replacement, three nuts and bolts.
, added some marine grease inside the groove between metal and plastic chute, no squeek, the snow now ejects out the way it should and not thru all the cracks in the chute
Wayne -
April 1, 2022
Verified Purchase
PERFECT
Easy repair and works as it should. Arrived very quickly.
Guest -
March 21, 2022
Verified Purchase
Exact Replacement
Could not believe the part was in stock. The new shout works fine, without the shout he snowblower is almost useless. Will be back for parts in the future. Every time I have had good luck..
Guest -
February 23, 2022
Verified Purchase
Right Part
It arrived quickly, fit perfectly. Great company to use.
Guest -
February 1, 2022
Verified Purchase
Perfect fit
Part was exact replacement, works great. Wish I had remembered you were so close, I could have saved outrageous shipping fees
Guest -
December 30, 2021
Verified Purchase
Part is a fit.
The service was good and the part is great. Easy to install.
Guest -
October 15, 2021
Verified Purchase
Part loooks good even better then the original
Part looks good heavy duty. Haven't installed it yet to busy shoveling snow.
Guest -
February 19, 2021
Verified Purchase
Minor repair
It was a brand new part . It was exactly what I was looking for.
Guest -
February 18, 2021
Verified Purchase
Discharge chute - very easy repair
Removed old (broken) discharge chute. New chute fits perfectly. Website was easy to use. Probably saved money by DIY. Definitely recommend this site.
Guest -
January 25, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Assembly Chute C1 653blk
Is there a compatible METAL chute that will fit my machine. The plastic one always cracks, over time, at the mounting holes.
David
for model number 536887990
asked on 2022-10-27
Hello David, Thank you for the question. This part is made from durable plastic. Very sorry we do not list a Metal Chute. We strongly recommend you contact the manufacturer, as they would have this information in their system. Ask them for the part number you require and contact back to see if it is something we carry. We hope this helps!
eReplacementParts Team October 27, 2022
Why don't you have a funnel chute for this blower
Jerome
asked on 2022-02-04
Hello Jerome, thank you for contacting us. In order for us to locate the correct parts and repair information we will require the model number of the unit. Once you have located the model number please feel free to resubmit the question and we will be happy to help you. We are looking forward to hearing from you!
eReplacementParts Team February 04, 2022
I need the bolts to mount a replacement chute on my snow blower
Anthon
asked on 2022-02-03
Hi Anthon,
Thank you for your question. Before we carry the bolts for you, we will need the model number from it snowblower. The model number is usually found on the rear frame between the 2 wheels. If you could resubmit your question with this information, we would be happy to help you. If you have any questions, please let us know. We are open 7 days a week. We look forward to hearing from you!
eReplacementParts Team February 03, 2022
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Snow chute was damaged from ejecting pieces of ice.
Edward - November 25, 2015
👍 11 of 12 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Socket set
Parts Used
Replaced the chute! My snow blower is a 2005 model and I found the mounting holes on the
replacement chute were slightly off. I used a screwdriver through the holes to line up with the holes in the base and then force the bolts through the holes in the replacement chute.
If the oval holes were made longer in the replacement chute, this problem would not occur.
replacement chute were slightly off. I used a screwdriver through the holes to line up with the holes in the base and then force the bolts through the holes in the replacement chute.
If the oval holes were made longer in the replacement chute, this problem would not occur.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute was cracked and needed to be replaced
jim - December 27, 2015
👍 9 of 10 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
I loosened three Bolts/nuts holding the base of the chute to the turntable on the machine, using a wrench and socket. What I'm calling the turntable is the circular piece that rotates the chute to allow directional discharge of the snow using the "turntable" crank. Using the socket is a little tight and hard to fit inside of the chute. Luckily I have a "mini" socket set, which worked great. A pliers and wrench combination would work fine, but might take a bit longer.
Once the original chute was removed, I lined up the holes in the replacement chute to the turntable and inserted the bolts, washers and nuts. I initially left each rather loose in order to be able to make sure the chute was sitting evenly on the turntable. Then securely tightened each.
Then I removed the hardware from the original chute that allows you to adjust the angle/trajectory of the snow discharge ( two nuts, two washers, one bolt and one plastic turn knob. I installed those in the new chute, being careful not to over tighten the nut and bolt on one side in order to allow for ease of adjustment. It's important to make sure the bolt and nut are secure, though, so as to not lose them when operating the machine.
That's it. In all it took about 20 minutes, including searching for a wrench that fit. Very easy replacement.
Once the original chute was removed, I lined up the holes in the replacement chute to the turntable and inserted the bolts, washers and nuts. I initially left each rather loose in order to be able to make sure the chute was sitting evenly on the turntable. Then securely tightened each.
Then I removed the hardware from the original chute that allows you to adjust the angle/trajectory of the snow discharge ( two nuts, two washers, one bolt and one plastic turn knob. I installed those in the new chute, being careful not to over tighten the nut and bolt on one side in order to allow for ease of adjustment. It's important to make sure the bolt and nut are secure, though, so as to not lose them when operating the machine.
That's it. In all it took about 20 minutes, including searching for a wrench that fit. Very easy replacement.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Plastic chute broke.
Norman - January 19, 2018
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
15-30 minutes
Tools Used
Socket set, Wrench Set
Parts Used
3 nuts and bolts to replace the chute.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Discharge chute was old and the bolt holes had ripped
Ned - September 6, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Medium
Time
15-30 minutes
Tools Used
Power Drill, Wrench Set, Adjustable Wrench
Parts Used
1. Removed old chute
2. The replacement chute was not an exact match (the part had been discontinued-the snowblower is OLD), so I had to drill new holes for the bolts (the holes did not match exactly since it was not the exact part)
3 Bolted on new chute assembly
2. The replacement chute was not an exact match (the part had been discontinued-the snowblower is OLD), so I had to drill new holes for the bolts (the holes did not match exactly since it was not the exact part)
3 Bolted on new chute assembly
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute cracked at base mounting bolt holes.
Robert - April 2, 2017
👍 2 of 3 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
1. Removed mounting bolts and adjustable upper chute bolts and hand knob.
2. Reinstalled bolts in new lower chute and hand knob in upper adjustable chute.
3. New chute lower holes did no line up perfect but were acceptable. Placed side bolts in first
then the rear bolt which fit without enlarging holes.
2. Reinstalled bolts in new lower chute and hand knob in upper adjustable chute.
3. New chute lower holes did no line up perfect but were acceptable. Placed side bolts in first
then the rear bolt which fit without enlarging holes.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chufe discharge was broken
James - January 2, 2017
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, Wrench Set
Parts Used
I removed the three screw from the old broken discharge. Then attached the new discharge
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Snowblower chute was broken
Paul - December 26, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Adjustable Wrench
Parts Used
Removed 3 nuts/bolts and old chute. Inserted the 3 nuts/bolts into the proper holes with the new chute - tightened and done.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute bolt hole torn out
daryl - December 23, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Pliers, Socket set
Parts Used
Remove 3 bolts and nuts at the base of the chute and and removed the old chute.
Installed the chute with the bolts and nuts. Note: When you order new parts, order
new bolts and nuts
Installed the chute with the bolts and nuts. Note: When you order new parts, order
new bolts and nuts
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute was broken
Paul - February 28, 2016
👍 1 of 1 people found this instruction helpful
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Wrench Set
Parts Used
Remove three bolts, remove broken chute replace and put three bolts back. It took as long as it did to type this, to complete job.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Chute broke
Paul - January 31, 2024
Tool Type
Snowblower
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set
Parts Used
Replaced old broken chute with new one.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Load More Install Stories
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Learn MoreOur product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
