Easy
30-60 minutes
It is a genuine item that is supplied by the original equipment manufacturer for use with Kohler engines commonly installed on lawn and garden equipment. The purpose of this cleaner is to ensure that the air that goes through the unit is free of dust and other harmful contaminants, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality air cleaner element is sold individually.
Kit: Air Filter/pre-cleaner 12 883 10-S1
OEM part for: Kohler, MTD
Part Number: 12 883 10-S1
$26.11
In Stock
Ships within 1 business day 
Jump To:
Frequently Purchased Together ?
Compatibility
This Kit: Air Filter/pre-cleaner will fit the following 279 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Lawn Mower Parts
- Engine Parts
This part replaces obsolete part #: 1208310-S1, KH-12-883-10-S1, 1208310-S, 12-083-10-S, KH-12-083-12, KH-12-083-10
Customer Part Reviews ?
Average Rating (out of 5):
Click to filter by ratings:
5 stars
5
4 stars
1
3 stars
0
2 stars
0
1 stars
0
< PREV
- 1
Good air
Timely service, perfect replacement parts, mower ran perfectly no longer air restricted.
Guest -
August 29, 2022
Verified Purchase
Hard to find parts for older equipment
I was really surprised I was able to find these parts so easy with replacement parts.com. I had search other websites including the manufacturer with no luck. Good job.
Guest -
May 7, 2021
Verified Purchase
Outstanding experience
Order was correct and delivered on time.
Guest -
May 8, 2020
Verified Purchase
Kohler air filter
Correct parts and arrived quickly.
Guest -
December 17, 2019
Verified Purchase
IT WORKS
Forgot how well the mower use to run until I replaced the filter.
Guest -
June 18, 2019
Verified Purchase
Parts were good
Parts were fine but using FedEx smart post is terrible it should come FedEx only I waited three extra days for it to come out of the post office or just ship it straight to the post office it would be faster
Guest -
June 19, 2021
Verified Purchase
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Kit: Air Filter/pre-cleaner
No questions have been asked yet
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Filter was dirty, these caused non effiecent air flow
Jim - June 13, 2020
Tool Type
Lawn Tractor
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Has wing nut, no tools neeeded
Parts Used
Removed air filter cover by loseing wing nut with fingers. Remove filter wing nut with fingers as well, along with rubber spacer. Make sure your filter is the correct hieght. Mine was the shorter one for this model, john deere lt155 15hp. Reverse order of removal. Back running like normal.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
FILTER CLOGGED
Gerald - June 21, 2019
Tool Type
Engine
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Pliers
Parts Used
REMOVED COVER
UNSCREWED FILTER RETAINER AND OLD FILTER
NEW FILTER ON
CLAMP SCREW AND SPACER ON
COVER BACK ON
DONE
UNSCREWED FILTER RETAINER AND OLD FILTER
NEW FILTER ON
CLAMP SCREW AND SPACER ON
COVER BACK ON
DONE
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Mower was hard to start and throttle cable stuff.
Matthew - March 27, 2019
Tool Type
Lawn Mower
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Socket set, Wrench Set, None
Replaced faulty throttle cable.
Installed new carburetor and air filter element.
Adjust throttle linkage and test. Started one time!
We had a problem with the carburetor and throttle cable which wouldn't allow it to start.
This unit was a Husqvarna walk behind commercial mower W3613.
Installed new carburetor and air filter element.
Adjust throttle linkage and test. Started one time!
We had a problem with the carburetor and throttle cable which wouldn't allow it to start.
This unit was a Husqvarna walk behind commercial mower W3613.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Lack of maintenance led to gummed up carburetor.
Henry - June 21, 2018
Tool Type
Engine
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pliers, Socket set, Wrench Set, Nutdriver, Carb cleaner (dip and spray), small nylon scrub brush.
1) Removed cowl from mower for access to carburetor. Removed air cleaner.
2) Removed and disassembled carburetor paying attention to how throttle and governor linkages are hooked up. (A picture taken with phone is a handy reference for re-assembly.)
3) Cleaned carburetor as much as possible with spray carb cleaner, brush and shop air.
4) Placed metal parts of carb in dip basket, soaked in gallon of carb cleaner overnight to remove residue.
5) Reassembled carburetor using parts from repair kit and bowl replacement kit. The mower originally had a solenoid to close off fuel flow when shut off, this was replaced with a bowl mounting plug from the bowl replacement kit. (Replacement solenoid is $70, a $3 on/off valve in the fuel line performs the same function.
6) Cleaned all traces of old gasket from engine block, installed carb using new gasket.
7) Cleaned gas tank, replaced old fuel line and fuel filter. Installed in-line fuel shut off valve.
8) Installed air cleaner assembly, replaced old air filter & pre-filter.
9) Checked oil level, added fuel, and started mower.
10) Ran mower for a few minutes to bring oil up to operating temp. Shut off, drained oil, replaced oil filter and filled with fresh oil.
11) Started mower, let run for a few minutes to check for leaks, shut off fuel flow to carb and let run till motor dies from lack of fuel.
2) Removed and disassembled carburetor paying attention to how throttle and governor linkages are hooked up. (A picture taken with phone is a handy reference for re-assembly.)
3) Cleaned carburetor as much as possible with spray carb cleaner, brush and shop air.
4) Placed metal parts of carb in dip basket, soaked in gallon of carb cleaner overnight to remove residue.
5) Reassembled carburetor using parts from repair kit and bowl replacement kit. The mower originally had a solenoid to close off fuel flow when shut off, this was replaced with a bowl mounting plug from the bowl replacement kit. (Replacement solenoid is $70, a $3 on/off valve in the fuel line performs the same function.
6) Cleaned all traces of old gasket from engine block, installed carb using new gasket.
7) Cleaned gas tank, replaced old fuel line and fuel filter. Installed in-line fuel shut off valve.
8) Installed air cleaner assembly, replaced old air filter & pre-filter.
9) Checked oil level, added fuel, and started mower.
10) Ran mower for a few minutes to bring oil up to operating temp. Shut off, drained oil, replaced oil filter and filled with fresh oil.
11) Started mower, let run for a few minutes to check for leaks, shut off fuel flow to carb and let run till motor dies from lack of fuel.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.
