This is an authentic OEM replacement part used on Gas Trimmers, it is sold individually. This is just the Foam Filter, Cover and the Base Assembly are sold separately. The purpose of this filter is to keep dirt and other small particles from entering the engine and causing internal engine damage. Once this type of filter gets clogged or dirty it should be changed (Not Cleaned).
Air Filter A226000570
OEM part for: Shindaiwa
Part Number: A226000570
Jump To:
Frequently Purchased Together ?
Compatibility
This Air Filter will fit the following 19 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
Shindaiwa
Show More Compatible ModelsThis item works with the following types of products:
- Hedge Trimmer Parts
- Trimmer Parts
This part replaces obsolete part #: 62100-82120
Repair Videos ?
Filthy Filters? This article will show you how to install a filter kit on an Echo SRM-225 trimmer....
May 27, 2015
|
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Air Filter
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Power was down and running was a bit dodgy compared to regular performance
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, Plug wrench; 16\\
Remove the air filter cover; wipe air intake out with clean gas and paper towel
Put in new filter; close cover
Remove old spark plug, check gap to manual recommendations; set gap; insert spark plug and tighten.
Remove four (4) screws from the primer pump housing; remove primer pump bulb (it was cracked); replace new primer bulb into housing; set the screws in the normal cross pattern for a good seat and even torque - check for leaks (none - yeah?)
Fish out the fuel filter from the tank with a coat hanger wire bent for this task
Replace the filter on the fuel line end - push back into the tank
All good! Runs great again.
basic maintenence
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, wire to fish out fuel filter
Foam filter was deteriorating
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed
Parts Used
Regular maintenance
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, spark plug wrench
Parts Used
plastic broken
Tool Type
Edger
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Pliers, Wrench Set
needed new air filter
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, No tools needed
Parts Used
recoil assembly broke, decided to change plug and filter while doing primary repair.
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Screwdriver, hex key, plug wrench, fingers
1. Removed broken recoil assembly - it is sometime necessary to loosen adjacent parts to remove the part you're after.
2. Attached new recoil assembly, tightened all loosened fasteners.
3. Remove and replace plug using plug wrench - make sure plug wire is properly seated.
4. Remove and replace air filter using finger screw.
Lost power and had trouble starting.
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Allen wrench
Choke didn't work
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
Socket set, Allen wrench
Removed the old air filter
Removed the screws holding the air filter base and removed the old one , then screwed on the new one
Remove the old spark plug and gap the new one at 0.025
Install the new air filter
Install the air filter cover
Hard start due to broken choke plate
Tool Type
Trimmer
Difficulty
Easy
Time
Less than 15 minutes
Tools Used
, Allen Wrench
2.Remove air filter
3.Remove the two carburetor mounting bolts. (Allen head)
3.Replace the air filter base
4.Install the bolts
5.Install air filter
6.Install air filter cover
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.