This is a genuine manufacturer sourced replacement air filter designed for use on gas powered trimmers. It helps to remove dust and other contaminants from going into the carburetor and the engine. This is a foam item which is sold individually. Please note the air filter cover and the plate are both sold separately.
Replacing this air filter you will need a hex key or an allen wrench.
• Remove the filter cover
• Take out the old air filter
• Secure the new one in place
• Secure the filter cover
Air Filter 530027530
OEM part for: Paramount, Weed Eater
Part Number: 530027530
Jump To:
Product Description ?
- Classification: Part
- Weight: 0.01 lbs.
- Shipping: Ships Worldwide
Frequently Purchased Together ?
Compatibility
This Air Filter will fit the following 116 machines. Confirm this part works with your model, and view the detailed model diagrams and repair help we have to offer.
This item works with the following types of products:
- Trimmer Parts
Customer Part Reviews ?
- 1
Questions & Answers ?
Our customer Service team is at the ready daily to answer your part and product questions.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Does this fit my product?Questions & Answers for Air Filter
Customer Repair Instructions ?
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Damaged cutter head assembly/Poor running condition
Tool Type
Trimmer
Difficulty
Medium
Time
15-30 minutes
Tools Used
Screwdriver, Wrench Set, Allen wrench set
Parts Used
The cutter head was already removed from my trimmer when I got it so I cleaned the threads on the shaft and easily spun on the cutter head. To snug it on I used an adjustable wrench to hold the nut at the end of the shaft. It was necessary to disassemble the cutter head assembly to properly tighten it onto the shaft.
Fuel line fell apart in tank & clogged the carb
Tool Type
Trimmer
Difficulty
Medium
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, torx driver
Weed eater would not run on open choke or idle
Tool Type
Trimmer
Difficulty
Medium
Time
More than 2 hours
Tools Used
Screwdriver, Pick, calipers
2. Installed new air filter
3. Also had to install new fuel lines from gas tank to carburetor. Got fuel lines locally.
4. Initially, weed eater did not run for more than a few seconds. Had to adjust idle mixture screw. Now it runs and cuts grass again.
This project was medium difficulty only because of the small space to work on my weed eater. Just don't lose your screws and all will go well.
Gas line old, brittle and broke off between bottom of gas tank and carb.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Pliers, Needle Nose, allen set, piece of wire
2) Fished out old gas line filter using piece of stiff wire. Wire bent in a 'U' shape on one end to grab old gas line from inside the gas tank.
3) Inserted new gas line thru the gas line hole in the bottom of the tank. Push plenty of gas line into tank until you can grab it with a needle nose pliers of the wire hook and pull out through the gas tank fill hole.
4) Trim gas line and insert gas line into new filter. Push gas line tight to gas filter.
5) Pull on gas line coming out of the bottom of the tank to shorten amount of gas line in the tank. Leave enough gas line in tank so gas filter lays on the bottom of the tank.
6) Cut other end of gas line to reach carb gas inlet. Insert gas line over gas inlet on the carb.
7) Trim new filter to length and insert into cover. Reinstall air cleaner cover, tighten screws.
8) Fill with fresh gas/oil mixture. Pull a few times to prime the new gas line and fire it up.
Carburetor needed rebuilding
Tool Type
Trimmer
Difficulty
Easy
Time
30-60 minutes
Tools Used
Screwdriver, Pliers, Allen wrench
Remove the screws holding the carburetor
Remove air filter plate, primer, the fuel lines and throttle from the carburetor
Remove the carburetor, use the kit to rebuild it
Install the rebuilt carburetor, air filter plate and fuel lines and throttle
Replace the air filter, and the rest of the air cleaner assembly
Trimmer had not been used for years would not start because it was not getting fuel.
Tool Type
Trimmer
Difficulty
Easy
Time
15-30 minutes
Tools Used
Screwdriver, carb cleaner
Used print out of diagram of carb and parts to verify correct reassemble of parts.
OEM stands for Original Equipment Manufacturer and means the part you’re buying is sourced directly from the manufacturer who made your product. At eReplacementParts, we sell only genuine OEM parts, guaranteeing the part you’re purchasing is of better design and of higher quality than aftermarket parts.
Our product descriptions are a combination of data sourced directly from the manufacturers who made your product as well as content researched and curated by our content & customer service teams. This content is edited and reviewed internally before being made public to customers.
Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our part reviews are solicited directly from other customers who have purchased this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part. While we moderate these reviews for profanity, offensive language or personally identifiable information, these reviews are posted exactly as submitted and no alterations are made by our team.
Based on data from past customer purchasing behaviors, these parts are most commonly purchased together along with the part you are viewing. These parts may be necessary or helpful to replace to complete your current repair.
All our installation videos are created and produced in collaboration with our in-house repair technician, Mark Sodja, who has helped millions of eReplacementParts customers over the last 13 years repair their products. Mark has years of experience in selling and repairing both commercial and residential products with a specialty in gas-powered equipment.
This data is collected from customers who submitted a repair instruction after replacing this exact part. Customers can rate how easy the repair was to complete and how long it took. We aggregate this data to provide a repair rating that allows customers to quickly determine the difficulty and time needed to perform their own repair.